Introduction：
12V slim led driver are designed for a single direct current (DC) output voltage. Most common constant voltage drivers (or Power Supplies) are 12VDC or 24VDC. An LED light that is rated for constant voltage usually specifies the amount of input voltage it needs to operate correctly.
A constant voltage power supply receives standard line voltage (120-277VAC). This is the type of power that is typically output from your wall outlets around the home. Constant Voltage Drivers switch this alternating current voltage (VAC) to a low direct current voltage (VDC). The driver will always maintain a constant voltage no matter what kind of current load is put on it. Most often, constant voltage drivers are implemented in under-cabinet lights and other LED flex strip applications but it is not limited to those categories.
Key Feature:
1.100-240VAC(50/60Hz) Input;
2.Isolated topology;
3.High efficiency and good stability;
4.The copper wire of transformer is Grade F, resist high-temperature 155℃
5.Current accuracy: ±3%
6.Short circuit,over voltage, over current and over temperature protection
7.Cooling by natural air convection
8.100% Full load burn-in test
9.Independent, Class 2 constant current type
10.Degree of protection IP20
11.Application for LED strip lights and LED cabinet lights;
12.Constant voltage driver provides energy-efficient LED power
Performance Parameters:
INPUT | Input Voltage | 100-240VAC |
Input frequency | 50/60Hz | |
Power Factor | 0.5 | |
OUTPUT | DC Voltage | 12V/24V |
Rated Current | 125-1680mA | |
Rated Power | 15-20W | |
SETUP Rise Time | <0.5S(Full load) | |
PROTECTION | Short Circuit | Recovers automatically after fault condition is removed |
Overload | Overload protected @110-130% above peak rating | |
Over Temperature | Shut down open voltage . re-power on to recover | |
| IP Code | IP20 | |
ENVIRONMENT | Working TEMP. | -20-40℃ (refer to output load derating curve) |
| Storage TEMP. | -40-+80℃ | |
Safety & EMC | Safety Standards | CE |
| EMC Test Standard | EMC | |
DIMENSION | 130*50*14mm | |
Application：
12V slim led driver are widely used in light strips, cabinet lights, wardrobe lights, furniture lighting, linear lights, advertising light boxes, street lights, tunnel lights, LED floor tiles, LED point light sources, LED grille lights, LED indoor lights, LED ceiling lights, buildings , Roads and bridges, square building facilities, lawn lights, curtain wall lights, LED wall washer lights, table lamp hotel stadium LED plant lights aquarium lights, etc where with compact mounting position requirements.
FAQ：
Q1:Are your manufacturer and do you have experience?
A:We are manufacturer with more than 10 years experience.
Q2:What certificates, do you have for your products?
A:We have CE,TUV,LVDE,Rohs certificates for our products.
Q3:Can we add our own Logo on products?
A:Yes,you can add your logo on them.
Q4:What is the warranty?
A:At least 2 years warranty.
Q5:Can you do special packaging for us?
A:Yes,we can customize packing.
Q6:What is your Minimum order quantity?
A:Nomally 500pcs,small quantity is also available.
Q7:Can you do sample order?
A:Yes, we can.
Hot Tags: 12v slim led driver, China, manufacturers, suppliers, factory, customized, made in China, ir led driver, led driver 30w, 100w led driver, led driver 60w, linear led driver