Regarding the infrared hand sweep switch, we have many kinds, and there are also two-way ones that can be installed behind the inner door of the cabinet, can also be installed in the mirror, and can be dimme.
The following is an introduction to the function of the infrared hand scan switch:
-
Non-contact reflective induction, smart computer detects near-distance reflective objects (palm), and automatically switches the working state;
-
2. Working mode: active infrared working mode, put your hand on the designated part of the sensor for 0.5 seconds, the switch is turned on (or Disconnect) and keep this state all the time; when it is sensed again, it will change to the opposite state, disconnect (or switch on) and keep this state all the time, the sensing distance of 5cm is the best;
-
It can penetrate glass, especially suitable for kitchen Use cabinet lights and install non-contact induction switches in the kitchen to avoid turning the lights on and off by hand while cooking, and bringing bacteria on the switch panel to the diet;
-
4. It has good stability, strong anti-interference, and can prevent sunlight Infrared interference, wide load capacity.
If you are interested in this product, you can contact us through this website.
https://lgdd.en.alibaba.com/?spm=a2700.7756200.0.0.7cda71d25AX3tP