LED mirrors, bathroom mirrors, make-up mirrors, fill-in mirrors, defogging mirrors - these are commonly found in hotels or many homes, while the versatility of smart bathroom mirrors has been refreshing. The smart mirror's light infinitely dimming function, defogging function, Bluetooth function, multi-function time are all features. Today we will learn about the defogging function.
When the shower, the steam begins to fill the air, the fog formed on the bathroom mirror. Shower water temperature are roughly similar to the human body temperature, between 35 ℃ -40 ℃, the surface temperature of the bathroom mirror relative to the room temperature is also slightly lower. Water vapour encounters low temperature bathroom mirror, condensed into a layer of water mist on the surface (can be understood as a very small droplets), so that the surface to form a diffuse reflection, can not be normal reflection, which is the reason why the bathroom mirror fog. To get rid of the fog very effectively, that is to use the defogging mirror instead of the traditional mirror.
The principle of anti-fog anti-fog
According to the causes of bathroom mirror fogging, you can analyse how you can not produce fog:
Principle one: reduce the humidity of the air;
Principle two: reduce the temperature difference between water vapour and bathroom mirror (increase the surface temperature of the bathroom mirror);
Principle three: so that the fog in the bathroom mirror surface can not be formed.
Almost all products on the market are derived from the above is the kind of principle.
In addition to fog anti-fog method
1. LED bathroom mirror with anti-fog film, and electric heating bathroom mirror principle, by heating to reduce the mirror surface and the temperature difference between the room to remove fog. This is a more feasible way to upgrade the lighting mirror
2. heating the mirror itself, reduce the temperature difference, when there is fog heating can be de-fogging, de-fogging time fast or slow with the heating power. But need to pay attention to, the heating power is too large, the temperature change is too fast may lead to rupture of the mirror surface and other problems.
3. through the coating of microporous organisation of the formation of fog layer, theoretically with anti-fog, anti-fouling, anti-static effect. But the actual effect is poor, and most of this coating can last a short time, not recommended for use in bathroom mirrors.
As we continue to embrace the convenience of smart technology in our daily lives, smart bathroom mirrors are the perfect addition to any modern bathroom. Say goodbye to constantly cleaning foggy mirrors and hello to a more convenient lifestyle.
For more information on smart bathroom mirrors, visit our website.