1. What is a constant voltage power supply
It means that when the input voltage is within the specified range and the load current changes within the rated range, the output voltage remains constant.
2. What is a constant current power supply
It means that the input voltage is within the specified range, the output current is constant, but the output voltage varies within a certain range with the size of the load.
3. Under what conditions should a constant voltage power supply be selected, and under what conditions should a constant current power supply be selected?
A. Constant voltage power supply and constant current power supply can be used in places where it is always bright. Compared with the use of constant current power supply, the brightness consistency is better than that of constant voltage power supply.
B. It is more suitable to use a constant voltage power supply when it is used in the place of gradual change and scanning.
4. What are the requirements for the LED light group when using a constant voltage power supply?
The output voltage of the constant voltage power supply must be consistent with the working voltage of the LED light group. For example, the output voltage of the constant voltage power supply is 12V, the working voltage of each branch of the LED light group must also be 12V, and the number of branches of the LED module must be 12V. It can be arbitrarily increased or decreased within the range of the maximum output current. Due to the deviation of the LED conduction voltage drop, the voltage drop of each branch will also deviate, which will make the current of each branch different. Each branch should be connected in series with a voltage divider resistor or other current limiting measures.
5. What are the requirements for LED light groups when using constant current power supply?
The output current of the constant current power supply must be consistent with the sum of the currents on the number of branches of the LED lamps. The number of LEDs on the branch can be increased or decreased within the output voltage range. For example, the output current of the constant current power supply is 700mA and the output voltage is 2.5V ~12V; the working current of each branch of the LED lamp is 350mA, and the working voltage of a single LED lamp is 3.2, then the number of LED branches is 2, and the number of LED lights on the branch is within the range of 1~4 increase or decrease.
It is best to drive a single-channel LED light. If you drive multiple channels, one of the channels will be open, and the current will be added to other branches, causing the LED to overcurrent and burn out the LED. In order to avoid this problem, an equalization circuit is added to the LED light, for example: a certain LED burns out, and the bypassed components are automatically short-circuited, so that other LEDs work normally.
6. What is efficiency?
Due to the energy conversion and transfer process, various losses are inevitably generated. Therefore, the output power is always smaller than the input power. For example, when the power supply is working, various components and lines have resistance, which will generate heat after being energized. This part of the heat is energy loss, so the output power is always less than the input power. In order to measure the degree of energy loss in the process of conversion and transmission, we define the ratio of the output power of the electrical equipment to the input power as the efficiency of the electrical equipment. Efficiency is indicated by the letter h.
The high-efficiency power supply can save energy, and the high-efficiency power supply itself has low heat generation and low temperature rise, which can prolong the service life.
7. What is ripple
Ripple refers to the AC component other than the DC component of the DC output voltage. Usually the frequency of the AC component is generally greater than 100Hz or more, even tens of MHz, and the ripple cannot be eliminated.
10. Does the ripple affect the life of the LED?
Affect the life of the LED depends on the size of the ripple and the number of each branch. When the number of LEDs on the branch is unchanged, the larger the ripple, the shorter the life of the LED; when the ripple is unchanged, the more the number of LEDs on the branch, the smaller the impact of the ripple on the LED, and the longer the life. the longer.
11. Does the ripple affect the life of the LED?
Affect the life of the LED depends on the size of the ripple and the number of each branch. When the number of LEDs on the branch is unchanged, the larger the ripple, the shorter the life of the LED; when the ripple is unchanged, the more the number of LEDs on the branch, the smaller the impact of the ripple on the LED, and the longer the life. the longer.
For example: the output voltage of the power supply is 12V, the peak-to-peak value of the ripple is 500Mv, and the number of LEDs on each branch is 4
1. Under the condition of no ripple, the voltage of each LED is 12÷4=3V
2. After superimposing the ripple, the voltage of each LED is (12V÷0.5V)÷4=3.12V
12. Low temperature will affect the start-up time of the power supply and will not work properly. The lower the temperature, the more obvious the effect on the power supply. Whether the power supply can adapt to the low temperature work and environment depends on the rationality of the design of the internal circuit of the power supply and the reasonable parameter matching between the components. The circuit design of a power supply is reasonable, and the component parameters are reasonably matched, and the ability to adapt to the lower temperature is better. ,
13. Power
The work done per unit time is called power. Electric power can generally be divided into three types: apparent power, active power and reactive power.
14. What is apparent power?
In an AC circuit with resistance and inductance, the product of the rms value of the voltage and the rms value of the current is called apparent power. Apparent power = active power + reactive power, which is measured by ammeters, voltmeters and ohmmeters that are often used in practice. , VA are parameters in apparent power.
Active power
----Electrical energy is used to do work and is consumed, and they are converted into heat energy, light energy, mechanical energy or chemical energy, etc., called active power; also called average power. The instantaneous power of alternating current is not a constant value. The average value of power in one cycle is called active power. It refers to the power consumed by the resistance part of the circuit, represented by the letter P, in watts.
16. What is reactive power?
In a circuit with an inductance (or capacitance), the inductance (capacitance) converts the energy of the power supply into a magnetic field (or electric field) for half a cycle, and stores the energy of the magnetic field (or electric field) in the other half cycle. Electric field) energy is sent back to the power source. They only exchange energy with the power source, and do not really consume energy. We call the amplitude value of the rate at which the power source exchanges energy without power, which is represented by the letter Q, and the unit is lack.
If you are interested in our products, please visit www.hkram.com to have more information.







