Research on the development and application of power electronic devices and frequency conversion technology

Jun 09, 2021

Leave a message

With the rapid development of power electronics and computer technology, AC speed regulation has become a development trend to replace DC speed regulation. Frequency conversion speed regulation is recognized as the most promising speed regulation method at home and abroad for its excellent speed regulation and start and braking performance. Frequency conversion technology is the core technology of AC speed regulation, power electronics and computer technology are the core of frequency conversion technology, and power electronic devices are the foundation of power electronics technology. Power electronics technology is a high-tech that has developed rapidly in recent years. It is widely used in the fields of mechatronics, motor transmission, aerospace and so on. It has now become a high-tech that countries are competing to develop. Experts predict that in the highly developed field of automatic control in the 21st century, computer technology and power electronics technology are the two most important technologies.


1. The development process of power electronic devices


Thyristors came out in the United States in the late 1950s, marking the birth of power electronics technology. The first generation of power electronic devices is mainly silicon controlled rectifier (SCR), which was listed as an energy-saving technology in my country in the 1970s and promoted nationwide. However, SCR is a semi-controlled switching device that can only control its turn-on but not its turn-off. It is limited in the application of AC drives and variable frequency power supplies. Power transistors (GTR), gate turn-off thyristors (GTO), power MOS field effect transistors (PowerMOSFET), insulated gate transistors (IGBT), static induction transistors (SIT) and static induction thyristors (SITH), invented successively after the 1970s, etc. Their common feature is to control their conduction and turn-off. They are fully controlled switching devices. Since no converter circuit is required, the volume and weight are greatly reduced compared with SCR. At present, IGBT has become a mainstream device with its excellent characteristics, and GTO with large capacity also has a certain position.


Many countries are working hard to develop large-capacity devices, and 6000V IGBTs have been produced abroad. IEGT (injectionenhancedgatethyristor) is a new type of device that combines the advantages of IGBT and GTO. Samples of 1000A/4500V have already come out. IGCT (integratedgateeommutatedthyristor) uses a buffer layer and a transparent emitter on the basis of GTO. It is equivalent to a thyristor when it is turned on, and a transistor when it is turned off, thus effectively coordinating the contradiction between the on-state voltage and the blocking voltage, and the operating frequency can reach several Kilohertz [2][3]. The Swiss ABB company has launched IGCT up to 4500-6000V, 3000-3500A. MCT retired due to little progress, and the development of IGCT made it occupy an important position in the new pattern of power electronic devices. Compared with developed countries, my country has a bigger gap in device manufacturing than in application. New power devices such as high-power trench gate structure IGBT modules, IEGT, MOS gated thyristors, high-voltage gallium arsenide high-frequency rectifier diodes, silicon carbide (SIC) and other new power devices have the latest developments abroad. It is believed that the use of new semiconductor materials such as GaAs and SiC to make power devices to realize people's pursuit of "ideal devices" will be the main trend in the development of power electronic devices in the 21st century.


High-reliability power electronic building blocks (PEBB) and integrated power electronic modules (IPEM) are new hotspots in the recent development of power electronic technology in the United States. The fierce competition between GTO and IGCT, IGCT and high-voltage IGBT and other new power electronic devices will surely bring more opportunities and challenges to the development of new power electronic technologies and frequency conversion technologies in the 21st century.


2. The development process of frequency conversion technology


Frequency conversion technology was born in response to the need for stepless speed regulation of AC motors. Renewal of power electronics promotes power conversion


The continuous development of technology. At first, the frequency conversion technology was limited to frequency conversion and not variable voltage. Since the 1970s, the research on pulse width modulation variable voltage frequency conversion (PWM-VVVF) speed regulation has attracted people's attention. In the 1980s, the PWM mode optimization problem as the core of frequency conversion technology attracted people's strong interest, and many optimization modes were obtained, such as: modulation wave longitudinal division method, in-phase carrier PWM technology, phase-shifted carrier PWM technology, carrier modulation Wave simultaneous phase shifting PWM technology and so on.


The control of VVVF inverter is relatively simple, and its mechanical properties are also good. It can meet the smooth speed regulation requirements of general transmission, and has been widely used in various fields of industry. However, when this control method is at low frequency, because the output voltage is small, the influence of the stator resistance voltage drop is more significant, so the maximum output torque is reduced.


The method of vector control frequency conversion speed regulation is: the stator AC currents Ia, Ib, and Ic of the asynchronous motor in the three-phase coordinate system are transformed into the DC currents Iml, Itl under the synchronous rotating coordinate system through three-phase to two-phase transformation. , Then imitate the control method of the DC motor, obtain the control quantity of the DC motor, and realize the control of the asynchronous motor through the corresponding coordinate inverse transformation.


Direct torque control directly analyzes the mathematical model of the AC motor in the stator coordinate system, and controls the flux linkage and torque of the motor. It does not need to transform the AC motor into an equivalent DC motor, thus eliminating many complicated calculations in the vector rotation transformation; it does not need to imitate the control of the DC motor, nor does it need to simplify the mathematical model of the AC motor for decoupling.


VVVF frequency conversion, vector control frequency conversion, and direct torque control frequency conversion are all AC-DC-AC frequency conversion. The common disadvantage is that the input power factor is low, the harmonic current is large, the DC circuit requires a large energy storage capacitor, and the regenerative energy cannot be fed back to the grid, that is, four-quadrant operation cannot be performed. For this reason, matrix AC-AC frequency conversion came into being.


3. Frequency conversion technology and household appliances


In the 1970s, household appliances began to be converted to frequency conversion, and electromagnetic cooking appliances, frequency conversion lighting appliances, frequency conversion air conditioners, frequency conversion microwave ovens, frequency conversion refrigerators, IH (induction heating) rice buns, frequency conversion washing machines, etc. appeared [4].


At the end of the 20th century, household appliances relied on frequency conversion technology, mainly aiming at high functionality and power saving.


The first is the refrigerator. Because it works all day, the compressor is always running at a low speed after adopting frequency conversion refrigeration, which can completely eliminate the noise caused by the compressor starting, and the energy saving effect is more obvious. Secondly, after the air conditioner uses frequency conversion, the working range of the compressor is expanded, and the cooling and heating control can be realized without the compressor running in an intermittent state, so as to reduce power consumption and eliminate the discomfort caused by temperature changes. In recent years, the new frequency conversion refrigerators have not only reduced power consumption and achieved quietness, but also achieved rapid freezing by using high-speed operation.


In the washing machine, variable frequency control was used in the past to achieve variable speed control to improve washing performance. In addition to energy saving and quietness, the newly popular washing machine also introduced new control content to ensure the soft washing of clothes; electromagnetic cookers use high-frequency induction Heating makes the pot heat directly without the hot part of gas and electric heating, so it is not only safe, but also greatly improves the heating efficiency. Its working frequency is higher than the auditory sense, thereby eliminating the noise caused by the vibration of the rice pot.


Fourth, the harm caused by power electronic devices and countermeasures


The phase-controlled rectification and uncontrollable diode rectification in power electronic devices cause serious distortion of the input current waveform, which not only greatly reduces the power factor of the system, but also causes serious harmonic pollution.


In addition, the rapid changes of voltage and current in the hardware circuit make the power electronic devices bear great electrical stress, and cause serious electromagnetic interference (EM1) to the surrounding electrical equipment and radio waves, and the situation is getting worse. Many countries have formulated national standards to limit harmonics. The International Institute of Electrical and Electronics Engineers (IEEE), the International Electrotechnical Commission (IEC) and the International Conference on Large Power Grids (CIGRE) have launched their own harmonic standards. The Chinese government has also formulated relevant regulations to limit harmonics.


(1) Countermeasures for harmonics and electromagnetic interference


1. Harmonic suppression


In order to suppress the harmonics generated by power electronic devices, one method is to perform harmonic compensation, that is, to set up a harmonic compensation device to make the input current a sine wave.


The traditional harmonic compensation device uses an IC tuned filter, which can compensate both harmonics and reactive power. The disadvantage is that the compensation characteristics are affected by the impedance of the grid and the operating state, and it is easy to have parallel resonance with the system, which leads to harmonic amplification, and overloads or even burns the LC filter. In addition, it can only compensate the harmonics of a fixed frequency, and the effect is not ideal.


After the popularization and application of power electronic devices, the use of active power filters for harmonic compensation has become an important direction. The principle is to detect the harmonic current from the compensation object, and then generate a compensation current with the same magnitude and opposite polarity as the harmonic current, so that the grid current only contains the fundamental wave component. This filter can track and compensate harmonics whose frequency and amplitude change, and the compensation characteristics are not affected by the impedance of the grid.


The main method of large-capacity converter to reduce harmonics is to use multiple technology: superimpose multiple square waves to eliminate lower harmonics, thereby obtaining a step wave close to sine. The more multiplicity, the closer the waveform is to sine, but the more complex the circuit structure. In order to achieve low harmonics and high power factor, small-capacity converters generally use diode rectification and PWM chopping, often called power factor correction (PEC). Typical circuits include boost type, step-down type, buck-boost type and so on.


2. Electromagnetic interference suppression


The measure to solve EMI is to overcome the excessive current rise rate di/dt and voltage rise rate du/dt that appear when the switching device is turned on and off. At present, the more attention is paid to zero current switching (ZCS) and zero voltage switching (ZVS). ) Circuit. the way is:


(1) The inductance is connected in series with the switching device, which can suppress the di/dt when the switching device is turned on, so that there is no voltage and current overlap area on the device, and reduce the forward loss;


(2) Parallel capacitors are connected to the switching device, when the device is turned off, the du/dt is inhibited from rising, and there is no voltage and current overlap area on the device, which reduces the switching loss;


(3) Anti-parallel diodes are connected to the device. During the diode conduction period, the switching device is in a zero voltage and zero current state. At this time, the drive device is turned on or off to achieve ZVS and ZCS actions.


At present, the more commonly used software switching technologies include partial resonant PWM and lossless snubber circuit.


(2) Power factor compensation


The early method is to use a synchronous motor, which is a synchronous motor specially used to generate reactive power. It uses over-excitation and under-excitation to respectively emit different amounts of capacitive or inductive reactive power. However, because it is a rotating electric machine, the noise and loss are large, the operation and maintenance are also complicated, and the response speed is slow. Therefore, in many cases, it has been unable to meet the requirements of fast reactive power compensation.


Another method is to use a static reactive power compensation device with a saturated reactor. It has the advantages of static type and fast response speed, but because its core needs to be magnetized to a saturated state, the loss and noise are large, and there are some special problems of non-linear circuits, and it cannot be adjusted in phase to compensate for the unbalance of the load. Therefore, it failed to occupy the mainstream of static var compensation devices.


With the continuous development of power electronics technology, static var compensation devices using SCR, GTO and IGBT have been developed by leaps and bounds. Among them, the static var generator is the most superior. It has the advantages of fast adjustment speed and wide operating range, and after adopting multiple, multi-level or PWM techniques, it can greatly reduce the harmonic content in the compensation current. More importantly, the reactor and capacitive components used in the static var generator are small, which greatly reduces the size and cost of the device. The static reactive power generator represents the development direction of dynamic reactive power compensation devices.


Five, concluding remarks


We believe that power electronic technology will become one of the important pillar technologies in the 21st century. Frequency conversion technology occupies an important position in the field of power electronics technology. In recent years, the development in the field of medium voltage frequency conversion speed regulation and electric traction has attracted attention. With the integration of the global economy and my country’s accession to the World Trade Organization, my country’s power electronics and frequency conversion technology industries will have unprecedented development opportunities.