Regarding anti-fogging bathroom mirrors, chemical anti-fogging agent coating is generally used, and the effect is limited with time. Mirror anti-fog is the same as car glass defogging
The wind needs to be blown. There is a heating device behind the real anti-fog mirror, so that the mirror has heat to evaporate water vapor. If it is an ordinary mirror, use a hard soap dipped in water on the mirror surface, and then wipe it with a dry cloth to form a protective film, which can also act as a temporary anti-fog.
If you want to look beautiful, you must have good lighting. The front light or the light on the side of the mirror is very necessary.
When installing, you can use expansion bolts, pay attention to the type of tiles when drilling, if it is all-ceramic, use rhinestones, punch them little by little, otherwise, it is very easy to crack. If it is fixed with glass glue, do not use acidic glass glue. Neutral glue should be selected. Acidic glass glue usually reacts with the material on the back of the mirror, causing the mirror to be mottled. Before applying the glue, it is best to do a compatibility test to see if the glue is compatible with the material. A special mirror glue is the best.
In the bathroom, you usually stand in the mirror, and the bathroom mirror should be at least 135 cm from the ground. If the height difference between family members is large, you can adjust it up and down. Try to make your face in the middle of the mirror, so that the imaging effect is better. It is best to choose the frameless style, because the bathroom is often wet, and the frame materials such as wood and leather are used for a long time and are easy to change. 1. Use clean water directly, add a little laundry noodles or detergent, and then wipe it with newspaper to get clean.
2. Add a little vinegar to the water, then wipe it with newspaper.