Due to the depletion of traditional energy sources, the attention paid to environmental protection by various countries, and the shortcomings of the existing power system, distributed power generation will become the most important form of power generation in the world in the future. Power electronics technology is one of the three key technologies of distributed power generation technology, and it has extremely wide applications in distributed power generation. The application of power electronics technology in energy transfer, improvement of power quality, system energy storage, etc. is briefly introduced. Keywords: distributed power generation; power electronic equipment; power quality; energy storage Introduction The power system of centralized power generation, long-distance power transmission and interconnection of large grids has some drawbacks, which make the power system appear both "clumsy" and "fragile". At present, the combination of large power grids and distributed power grids is recognized by many energy and power experts in the world as the main way to save investment, reduce energy consumption, and improve the stability and flexibility of the power system. It is the development direction of the power industry in the 21st century. In addition, countries all over the world are now advocating "green environmental protection", and the power generation of my country's power system has caused great damage to the environment. The use of distributed power generation and the full use of the abundant "clean energy" in various regions are important for the sustainable development of our country. The strategy is of great significance. In recent years, foreign countries, especially represented by the United States and Japan, have made breakthrough progress in the research of new distributed power generation technology, and it is expected to occupy an increasing proportion of electricity production. my country's research on distributed power generation is relatively late, and there is no mature technology yet. However, distributed power generation is the development trend of the future power market. Therefore, it is important to step up the research and exploration of distributed power generation. One aspect is to apply power electronics technology to distributed power generation.
1 Application of power electronic technology in electric energy transmission In addition to traditional energy sources such as water power, coal, petroleum and atomic energy, distributed power generation has also widely adopted new alternative energy sources. Several commonly used and low-cost systems that are currently recognized are wind power generation systems, photovoltaic cells, micro gas turbines, and fuel cells. In these new distributed power generation systems, power electronic equipment plays an extremely important role in energy conversion. 1.1 Micro-turbine power generation system Because the steam turbine runs at a high speed, which can reach 80kr/min, and the alternator has a very high frequency, it cannot be directly connected to the AC power grid. A DC link is needed in the middle. Figure 1 succinctly describes the application of power electronic equipment in the energy conversion of the micro-turbine generator system. The electric energy generated by the alternator is rectified and sent to the DC capacitor, and then sent to the grid after active DC/AC inversion.
1.2 Wind power generation system The wind turbine can run at a constant speed or at a variable speed. Therefore, it can be connected to either a synchronous motor or an asynchronous motor. Because of its simple operation and economy, the method of connecting with asynchronous machine is widely used. Figure 2 depicts an asynchronous generator system, which is first rectified and then connected to the AC grid through an active inverter. 1.3 Photoelectric system The general method of photoelectric system for energy conversion is to convert the DC energy stored in the photovoltaic cell into an AC voltage synchronized with the power grid through an active DC/AC inverter. Figure 3 clearly and concisely depicts this process. The three-phase inverter here uses an IGBT type power tube. 1.4 Fuel cell system The DC voltage generated by the fuel cell is transformed into an AC voltage through an active DC/AC inverter. The conversion process is similar to that of a photovoltaic system. Figure 4 depicts this conversion process. Compared with AC transmission, DC transmission has many advantages. Therefore, among the above types of power generation, the transmission of electric energy is in the form of DC transmission. However, the large power grid and people's life and production need stable frequency AC power. Rectification, inverter circuits and other power electronic interface devices composed of power electronic equipment play an extremely critical role in the energy conversion and transmission of distributed power generation systems.
2 Application of Power Electronics in Improving Power Quality 3 Application of Other Aspects of Application of Power Electronics Technology in Distributed Power System In addition to the two aspects described above, there are also advantages in energy storage, load balancing, and system failure protection. Wide range of applications. Based on the consideration of system stability and economy, the distributed system must store a certain amount of electric energy to deal with emergencies. Modern energy storage technology has been developed to a certain extent. The more promising energy storage technologies include battery energy storage (BESS), super capacitor energy storage and flywheel energy storage. The method of battery energy storage and super capacitor energy storage is to first convert AC power to DC power and store it in a battery or a container; when it needs to store power, then convert the DC power to AC power that is compatible with the system. In this reversible transformation, power electronic equipment plays a key role. Flywheel energy storage technology converts electrical energy into mechanical energy storage. The basic structure of flywheel energy storage system includes five parts: flywheel rotor and power converter. It is precisely due to the development of high-strength fibers, low-loss bearings, and power electronic technology that The practical application of flywheel energy storage has become a reality.
Due to the great uncertainty of the power system load changes, the control system needs to be adjusted in time, otherwise it may cause a chain reaction to cause the system to malfunction, and in severe cases, the system may crash. Power electronic equipment has the characteristics of rapid response and reliable control. When used in power balance and fault protection, it will greatly reduce the probability of accidents and improve the stability of the system. 4 Conclusion Due to the various shortcomings of the current power generation model, the exhaustion of non-renewable energy, and the world's emphasis on environmental protection, distributed power generation will become the most important power generation model in the world in the future. Through the analysis of this article, it can be seen that power electronics technology has extremely wide applications in distributed power generation, and many scientific research organizations now recognize power electronics technology as one of the three key technologies in distributed power generation. Therefore, the power electronics technology Development and application will greatly promote the rapid popularization of distributed power generation models.








