RAM LED Full-length Mirror Strict Hanging Weight Test

Aug 04, 2025

Leave a message

 

To ensure product quality and user safety, the RAM team implements strict hanging weight testing procedures for LED smart mirrors. The core purpose of this test is to scientifically verify the adhesive strength between the mirror back basket (support structure) and the glass panel.


According to the testing specifications of RAM team engineers and quality management personnel, this test will apply an additional load on the mirror glass equivalent to 2 to 4 times the weight of the mirror itself based on the specific requirements of the customer or internal standards. This weight-bearing state will continue for 8 to 24 hours. During the testing period, a huge static load will continue to act on the bonding area, simulating the extreme stress that the product may withstand during long-term use.


The high-performance engineering structural adhesive selected by the RAM team supports the bonding of this critical structure. After a complete 24-hour curing and drying process, the structural adhesive can achieve extremely high bonding strength and stability. Hanging weight test is a direct inspection of the performance of the structural adhesive in practical application scenarios.
This hanging weight test is an indispensable part of its quality control process. By simulating load conditions far beyond the normal range of use, we can effectively evaluate and ensure the adhesion strength between the back basket and the glass, providing empirical evidence for the long-term durability and safety of the product. This testing process reflects the high importance that RAM attaches to the security of product structure.


Hanging weight test