In order to further standardize indoor wiring, reduce potential safety hazards and waste from repeated disassembly, and work with companies to create a consumer environment that reassures consumers and has a good market order, the National Household Appliances and Intelligent Cooperation Alliance invited electrical experts to jointly launch the "Safety" series of suggestions, from the material selection, wiring, switch and socket design, telephone network TV circuit design, etc., to give consumers a detailed and effective knowledge, guide consumers to choose a home improvement company, and how to communicate with designers during the home improvement process communication.
Although the switch socket is not the same as home appliances, it is related to the daily safety of the family and is the first line of defense to ensure the electrical safety of the home. Therefore, you must not be sloppy when choosing a switch socket. Electrical experts remind that different types of switches and sockets should be installed in different places. Water and smoke are often found in kitchens and toilets. It is best to install splash-proof boxes or plastic baffles on the panel of the socket, which can effectively prevent short circuits caused by oil and water vapor intrusion. In addition, when installing a three-hole socket, the ground wire must not be left blank, nor can the ground wire be directly connected to the gas pipeline.
We generally tangled. How many power outlets are reasonable in the room? Personally, if it is simple, three five-hole outlets are good. One is on the bedside, and sometimes there is some activity on the bed, such as putting a table lamp on it. Read a book, play computer on the bed, etc. There is another side of the dressing table, especially girls, sometimes it is convenient to blow a hair; another power socket is for televisions and other electrical appliances that can be moved around. Of course, these also depend on individual circumstances.
There are more forms of five-hole sockets, and some have switches on them to control whether the socket is powered on. Sometimes plugging in the power supply will be in a standby state, but it is troublesome to pull the plug. Then use a five-hole socket with a switch. As long as you press the switch lightly, the power of the power socket is cut off, which makes it more convenient to use. Some five-hole sockets use only one switch to control two plug-in sources, while others have two switches that control two- and three-plug sockets respectively. The specific five-hole socket to use depends on the situation.