How Capacitive Sensors Work
Capacitive sensors use various types of capacitors as sensing elements. Due to the change in the measured value, the capacitance of the capacitor will change. Through the measurement circuit, the change in capacitance can be converted into an electrical signal output. By measuring the magnitude of the electrical signal, the measured magnitude can be judged. This is the basic working principle of capacitive sensors.
Advantages of capacitive sensors
1. Good temperature stability
The capacitance value of the capacitive sensor is generally independent of the electrode material, which is conducive to the selection of materials with low temperature coefficients, and has little influence on the stability due to its very small heat generation. The resistance sensor has copper loss, which is easy to generate zero drift due to heat generation.
2. Simple structure
The capacitive sensor has a simple structure, is easy to manufacture and ensures high accuracy, and can be made very small to achieve some special measurements; it can work in harsh environments such as high temperature, strong radiation and strong magnetic fields, and can withstand large temperatures Change, withstand high pressure, high impact, overload, etc.; can measure ultra-high temperature and low pressure difference, and can also measure magnetic work.
3. Good dynamic response
Due to the small electrostatic attraction between the electrode plates (about a few 10^(-5)N), the capacitive sensor requires very little energy, and its movable part can be made very small and thin, that is, the mass It is very light, so its natural frequency is high, the dynamic response time is short, and it can work at frequencies of several megahertz, which is especially suitable for dynamic measurements. And because of its small dielectric loss, it can be powered at a higher frequency, so the system operates at a high frequency. It can be used to measure rapidly changing parameters.
4. Non-contact measurement and high sensitivity
Non-contact measurement of vibration or eccentricity of rotary shafts, radial clearance of small ball bearings, etc. When using non-contact measurement, the capacitive sensor has an averaging effect, which can reduce the influence of the surface roughness of the workpiece on the measurement.
In addition to the above advantages, capacitive sensors can measure extremely low pressure, force, and small acceleration, displacement, etc. It can be made very sensitive, with high resolution, and can sense displacements of 0.01μm or even smaller. Due to its small loss of medium such as air, the zero residual generated when the differential structure is connected in a bridge type is small, so the circuit is allowed to perform high magnification amplification, so that the instrument has high sensitivity.
Disadvantages of capacitive sensors
1. High output impedance and poor load capacity.
No matter what type of capacitive sensor, limited by the geometric size of the electrode plate, its capacitance is very small, generally tens to hundreds of picofarads (pF), so the output impedance of the capacitive sensor is very high, up to ~Ω. Due to the high output impedance, the output power is small, the load capacity is poor, and it is easily affected by external interference and causes instability, and even cannot work in severe cases.
2. The parasitic capacitance has a great influence.
The initial capacitance of the capacitive sensor is very small, while the capacitance of the lead cable connecting the sensor and the electronic circuit, the stray capacitance of the electronic circuit, and the capacitance formed by the capacitive plate and the surrounding conductors are relatively large. The existence of parasitic capacitance not only reduces the measurement sensitivity, but also causes nonlinear output. Since the parasitic capacitance changes randomly, the sensor is in an unstable working state, which affects the measurement accuracy.








