Introduction：
The Motion Detector Dimmer Light Switch is workable with or without obstacle by choice from two different detectors. With 05100.01, the Sensor can be installed behind nonmetallic transparent material, i.e. mirrors, glass, etc. This allows you to switch on and off the light more freely by hand wave. With 05100.02, it is ideally to be applied by the side of mirror or exposed outside the furniture. The sensor is light dimmable, which allows the light brightness smoothly dimming from 5% to 100%.
Key Feature:
1.IR sensor for LED Lighting
2.Can be installed behind nonmetallic transparent material
3.Can be switch on and off the light more freely by hand wave
4.Allows the light brightness smoothly dimming from 5% to 100%
Performance Parameters：
| Model | Input Voltage | Output Voltage | Output Current | Rated Power | Standby Power | Dimension (mm) |
7003.02D | 12V/24V | 12V/24V | 3.0A | 36W (12V) | ≤0.15W | 83*35.5*18.5 |
72W (24V) |
Sensor Options:
Model | Dimensions | Cut-Out Size | Board Thickness | Attentions |
05100.01 |
| Ø 18mm | ＜5mm | Workable behind nonmetallic transparent material (Glass, Plexiglass, etc). The thickness of the material should be less than 6mm |
05100.02 |
| Ø 13mm | ＞1mm | & |
Application:&
1. On/Off
(1) Move hand over the sensor, light gradually turn on.
(2) Move hand over the sensor once again, light gradually turns off.
2. Dimming
(1) Put hand over the sensor more than 1S, star dimming form 100% to 5%.
(2) Once the hand is taking off, the brightness will be fixed.
Repeat the same action, star dimming form 5% to 100%.
Size & Installation:
Dimension: 83*35.5*18.5mm, can be installed behind nonmetallic transparent material, mirrors, glass, etc, or applied by the side of mirror or exposed outside the furniture.
Connection:
What is the difference between 7003.00 and 7003.02D?
The main difference between them is that 7003.02D is light dimmable, which allows the light brightness smoothly dimming from 5% to 100%.
FAQ：
Q1. Can I have a sample order for the products?
A: Sure, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: It will takes 3-5 days to make sample of Mirror Full order production time is about 40-50 days, it depends on the quantity.
Q3: How long is our aging test ?
A: At least 24 hours aging test on 100% complete Lighting Fixture, 48 hours aging test on the first batch of order. Because lighting fixtures delivered without aging put customers at risk of faulty LED products. Aging test process is treat seriously in our company.
Q4：What's the payment terms?
A: For now, we can do T/T, Western Union, Paypal. If you have any other payment terms, you can give us advise. Next time, we may use it!
Hot Tags: motion detector dimmer light switch, China, manufacturers, suppliers, factory, customized, made in China