12 Volt PIR Sensor Switch

12 Volt PIR Sensor Switch

The 12Volt PIR Sensor Switch adopts good sensitivity detector and integrated circuit. It gathers automatism, convenience, safety, saving-energy and practical functions.
Send Inquiry
Description

39


Introduction: 


The 12 Volt PIR Sensor Switch uses highly sensitive detectors and integrated circuits. It uses the infrared energy of the human body as the control signal source, and when a person enters the detection field, the power supply can be activated immediately.


Key Feature: 

1. Detection range: maximum distance 3M

2. Delay adjustment: It can be set according to customer needs.

3. Press the button to select the delay time: 10s-120s

4. Energy saving and electricity saving, no need to worry about severe electricity consumption


 
Sensor Options:

Model

Dimensions

Cut - Out
    Size

Board Thickness

05101.00

35

Ø 19mm

<17mm



Installation Precautions:

The 12 Volt PIR Sensor Switch works by detecting the presence or absence of human infrared rays, and is generally installed indoors. The false alarm rate of the human body sensor switch has a great relationship with the installation position and method. The following points should be noted when installing the human body sensor switch:

1. Do not operate with power on during installation and then power on after installation.

2. Do not use it in the over power range.

3. When installing the human body sensor switch, it should be far away from places sensitive to air temperature changes such as heating, air conditioning, refrigerators, and stoves.

Performance Parameters:
Input/Output Voltage:12V/24V
Output Current:3.0A
Rated power:36W(12V)


Application:

1.When the sensor detects ambient light illumination > 160lux, the sensor controller will shut off the auto-detect mode.

36


2. When the sensor detects ambient light illumination < 80lux, the sensor controller will start the auto detect mode. 

37


3. Delay time selection

38


Size & Installation: 

Size: 83*35.5*18.5mm, can be used in stairs, walkways, toilets, elevators and many other general public places. 

6


FAQ:


1.Are you factory?Yes, we are factory in China.

Yes, we are factory in China.

 

2. Can I get a sample?

Yes, we can provide sample.

 

3. Is it difficult to install?

No, it is very easy to install. We will provide installation instructions for you too.





Hot Tags: 12 volt PIR sensor switch, China, manufacturers, suppliers, factory, customized, made in China