The LED lamp is a chip of electroluminescent semiconductor material. It is cured on the bracket with silver or white glue, and then the chip and the circuit board are connected with silver or gold wires. The periphery is sealed with epoxy resin to protect the internal core wires. Role, and finally install the shell, so the shock resistance of LED lights is good.
The LED uses a cold light source, which has low glare and no radiation, and does not generate harmful substances during use. LEDs have low operating voltage, adopt DC driving method, ultra-low power consumption (single tube 0.03 ~ 0.06W), electro-optical power conversion is close to 100%, and energy saving is more than 80% compared with traditional light sources under the same lighting effect. LED is more environmentally friendly. There is no ultraviolet and infrared in the spectrum, and the waste is recyclable, there is no pollution, it does not contain mercury, and it can be safely touched. It is a typical green lighting source.
LED is a solid cold light source, encapsulated by epoxy resin, anti-vibration, and there is no loose part in the lamp body. There are no shortcomings such as easy burning, thermal deposition, and light decay of the filament. The service life can reach 60,000 to 100,000 hours, which is traditional. More than 10 times the service life of the light source. LED performance is stable, can work normally in -30 ~ + 50 ° C environment.
1. Energy saving. 2. Long life LED light. 3. Good applicability, because a single LED is small, it can be made into any shape. 4. The response time is short, it is the response time of ns (nanosecond) level, and the response time of ordinary lamps is ms (millisecond) level. 5, environmental protection, no harmful metals, easy to recycle waste. 6, gorgeous colors, pure luminous colors, narrow spectral range, and can be mixed into three colors of red or green or blue into white or colorful.