1, with a soft cloth, dip in some kerosene or wax wipe.
2. Wipe the mirror and frame with a cloth dipped in milk to make it clear and bright.
3, mirror to use a soft dry cloth or cotton wipe, to prevent the mirror is scratched.
4, wipe with oil absorption paper, the effect is good. Another is to wipe with a newspaper, the mirror will not leave fur, and wipe out the mirror is bright.
5, do not touch the mirror with wet hands, do not use a wet cloth to wipe the mirror, to avoid increasing moisture invasion.
6, the mirror can not contact with salt, grease and acid substances, these substances are easy to corrode the mirror.
7, smear isolation layer: with dry cloth dipped in appropriate amount of detergent, shaving cream and other smearing on the mirror, evenly spread, stay for a period of time, detergent, shaving cream will form a layer of isolation layer, the mirror and the air from water vapor isolation.
8. Install defogging paste: a special electronic defogging paste can play a continuous role in defogging. Electronic defogging stick is very thin, it is installed on the back of the mirror, electricity can be directly converted into heat energy, and heat energy conduction to the mirror surface, can effectively prevent water vapor condensation on the surface of the mirror.
