Introduction：
The electronic IR sensor switch is made of environmentally friendly aluminum alloy, which is beautiful and durable. The probe has high corrosion resistance after oxidation treatment and is suitable for use in various humid environments. The sensor window uses a special filter, plus the use of High-speed signal processing chip, not afraid of the interference of various lights and sunlight, can also be used normally in strong light environment, the sensing distance is unchanged; the hand sweep sensor is sensitive, and the hand sweep detection program is based on long-term practical application to detect misoperations. Small size, light weight, easy to install and fix, large load power, and low heat generation at full load.
Performance Parameters:
Model | Voltage | Current | Detection Range | Power | Working temperature | Dimension |
ISH2D48 | DC8-24V | Max 2.5A | Max 10cm | 12V Max.30W | –20～55℃ | 40*20.5*10.8mm |
24V Max.60W |
Key Feature:
1. Electronic IR sensor switch
2. Small size, light weight
3. High corrosion resistance, suitable for use in various humid environments
4. Detection range:1.5M
5. can be installed behind the mirror
Application:
This electronic IR sensor switch can be installed under a cabinet and wave your hand power on. Wave your hands again, power off.
Installation:
Hot Tags: electronic ir sensor switch, China, manufacturers, suppliers, factory, customized, made in China