Introduction：
The IR sensor switch mirror is Non-touch reflective sensor, it can intelligent computer checks close-range reflective objects (palm), and automatically switches the operating status. The automatic infrared operation mode, is put the hand on the designated part of the sensor for 0.5 seconds, the switch is turned on (or off), and has always adhered to the situation; when it is sensed again, it becomes the opposite state, disconnected (or Pass) and always maintain the status.
The IR sensor switch to have the stability good, the anti-disturb strong characteristic, may prevent the sunlight the infrared ray to disturb, the load ability is wide.It’s applies to each kind of close range induction situation,such as wall switches, table lamp switches, mirror headlights, wardrobe lights and other lighting occasions.
Key Feature:
1. IR sensor switch
2.stability good, the anti-disturb strong characteristic
3.Memory Function
4.Detection Range：less than 5cm
5.The IR sensor can penetrate the glass （with head 05100.02）
Performance Parameters:
Model | Input Voltage | Output Voltage | Output Current | Rated Power | Standby Power | Dimension |
7003.00 | 100-240V | 100-240V | Max . 1.0A | 100W (AC 100V) | ≤0.5W | 83*35.5*18.5 |
| 240W (AC 240V) |
Sensor Options:
Model | Sensor head Dimensions | Cut-Out Size | Board Thickness | Attentions |
05100.01 |
| Ø 18mm | ＜5mm | |
05100.02 |
| Ø 13mm | ＞1mm | Workable behind nonmetallic transparent material (Glass, Plexiglass, etc). The thickness of the material should be less than 6mm |
Application:
IR sensor switch applies to each kind of close range induction situation,such as wall switches, table lamp switches, mirror headlights, wardrobe lights and other lighting occasions.
Size &Installation:
Size：83*35.5*18.5mm
Hot Tags: ir sensor switch mirror, China, manufacturers, suppliers, factory, customized, made in China