Led Mirror Touch Switch

Led Mirror Touch Switch

The Led mirror touch switch suitable for all kinds of lamps with material (such as glass, acrylic, plastic, ceramic, etc.) lamp body. The touch switch is sensitive and also high safety performance. The switch has no mechanical wear and has a long life. After the switch is installed, the switch accessories can’t be seen on the front of the mirror, but the touch sign seen through the backlight is seen. It is beautiful and generous and it's the first choice for making high-end products.
Send Inquiry
Description

Led mirror touch switch 1


Introduction:

The Led mirror touch switch suitable for all kinds of lamps with material (such as glass, acrylic, plastic, ceramic, etc.) lamp body. The touch switch is sensitive and also high safety performance. The switch has no mechanical wear and has a long life. After the switch is installed, the switch accessories can’t be seen on the front of the mirror, but the touch sign seen through the backlight is seen. It is beautiful and generous and it's the first choice for making high-end products.


Performance Parameters

Model

Input Voltage

Output Voltage

Rated Power

Rated Current

Standby power

Dimension(mm)

5103.02

12V/24

12v/24v

36W (12V)

72W(24V)

3.0A

≤0.15W

57*64*11mm


Key Feature:
1.Led mirror touch switch

2. Suitable for dual color temperature control between warm and white light
3.Memory function
4.workable with relay


Touch switch product function:

1.  Short press to adjust the color temperature, long press to adjust the brightness

2.  Memory Function: The brightness and color temperature gradually turn on until the last power-off

3.  The ratio of white light to warm light is: 100: 0-75:25-50:50-25:75-0: 100-all off.

4.  Brightness adjustment from 5% to 100%, maximum adjustment time is about 3 seconds, white the light color during adjustment is unchanged

5.  Each time when the output is turned off, short press to gradually brighten to the previous brightness;

6.  Color temperature and brightness changes have fade-in or fade-out effects, up to about 0.6 seconds.

7.  Suitable for dual color temperature control between warm and white light


Installation Steps:

1. Please cut off the main power switch before installation.

2. Design a touch point on the mirror surface, the touch point size is straight through 18-20mm, first of all, the mercury around the touch point of the lens must be removed, the best width of the removed mercury is 1.5-2MM, and the removed mercury part is just backlight. It can be seen through, and the touch position can be seen at a glance, which is beautiful and convenient to find the touch switch position.

3.Make a center cross on the touch point when installing the switch, there are three arrow lines on the touch head housing label, and the three arrow lines should be aligned with any three lines of the cross line on the touch point, (because the touch switch board has the most The position with a center diameter of 15mm is the touch-sensitive area, so be sure to align the touch-sensitive area on the touch switch board with the touch point of the mercury part knocked out by the mirror). It can only be touched after being aligned. The touch pad comes with adhesive. , There is a sticker on the surface of the adhesive, remove the sticker, and stick it on the reverse side of the lens. After the test, there is no problem with the switch. Then fix the glue around the switch. To ensure that it does not fall off permanently, and it can also be fixed by other methods.


Application:

Size:57*64*11mm,led mirror touch switch is suitable for smart home, led smart mirror, lamp, and other industries.
Led mirror touch switch 2

Hot Tags: led mirror touch switch, China, manufacturers, suppliers, factory, customized, made in China, 12V led Intelligent Touch switch, Led cabinet sensor switch, cabinet Touch sensor switch, bathroom mirror switch, mirror light touch sensor switch, smart touch switch for mirror