[1] The mirror should be placed in a dry place to avoid being affected by moisture as much as possible. Do not use wet hands or wet cloth touch, wipe the mirror, so that the mirror is damp, resulting in the optical layer of the mirror metamorphism black.
[2] The mirror should not contact with acid and alkali substances and grease substances, which are easy to corrode the mirror
[3] The mirror should be wiped with a soft dry cloth to prevent the mirror from being brushed.
[4] The frame should be cleaned with soft cotton cloth or cotton to prevent rust.
[5] Bathroom mirror can be smeated on its surface with soap before bathing, and then wiped with dry cloth. A layer of soap liquid film can be formed on the mirror surface, which can prevent mirror blur.
[6] Mirrors are afraid of moisture because mirror glass is generally cut before use. Water vapor easily from the cut side into the mirror, corrosion of the mirror, mildew, rust spots. To prevent this, users can apply a coat of paint on the side of the mirror and also on the back after they buy it back.
[7] Dip a dry rag in an appropriate amount of detergent or convergent toner or detergent and smear it on the mirror surface, evenly. The active ingredient that washes clean spirit contains, can prevent water vapor to condense in bathroom mirror face effectively, can have very good antifogging effect.
[8] Wipe the bathroom mirror with oil absorbent paper and the result is very good. Additional at present there is fog-proof lens on market to sell, basically be coating fog-proof lens and electric heat fog-proof lens. The former prevents the fog layer through the coating pores; The latter are electrically heated to raise the humidity of the mirror, so the mist evaporates quickly and cannot form a fog layer, but they are expensive bathroom mirrors.
