How to avoid electric shock when using LED bathroom mirror in the bathroom
Because there is a lot of water in the bathroom, and water is a good conductor, it is easy to get an electric shock, and because the water increases the actual conductive area, it is very difficult to rescue yourself. So the bathroom should pay special attention to prevent electric shock.
Electricity is generated through the principle of electromagnetic induction. It drives the rotor of the generator set through external primary energy (such as water energy, wind energy, nuclear energy, etc.), so that the rotor can rotate in the stator and perform the motion of cutting the magnetic lines of force, thereby generating an induced potential, which is drawn out through the terminal and connected in the loop, then current is generated.
The heating wire of the fan cannot be insulated
The motor is also not waterproof
The moisture in the bathroom is too high
It is very unsafe to use in this situation
Damaged hair dryer
Severe cases will result in an electric shock accident
Mandatory advice buddies not to joke about their lives
Take responsibility for yourself, and take responsibility for those who care about you
It's actually very simple.
Safety is considered when installing electrical facilities, so it brings us a lot of convenience.
First of all, remember to call a professional if there is a problem, and also turn off the power when changing the light bulb.
Secondly, use safe electrical facilities, don't buy the kind that do not pass the test.
After chasing, pay attention to the water. When you see that the water is about to be taken at the switch, turn off the power first.