How to install bathroom mirror?
Here are the bathroom mirror installation tips to share, bath mirror installation in just seven steps:
1. Installation height
When installing a bathroom mirror, pay attention to the height of the bathroom mirror from the ground, at least 135 cm, which is the lowest height, generally will not change.
(2) If the height difference between family members is large, it can be adjusted up and down, but only if a person's face is in the middle of the mirror. The center of the mirror is best kept 160-165 cm above the ground.
2. A fixed approach
(1) Measure the distance of the hook behind the mirror and mark it on the wall. Remember to punch holes in the marked areas. If it is a tile wall, you need to drill the tile with a glass drill first, and then drill 3CM with a hammer drill or an electric hammer.
(2) After drilling, put into the plastic expansion pipe, tighten the 3CM self-tapping screw, and reserve 0.5cm outside. The other three feet do the same thing, and the mirror hangs.
3. The use of glass glue
(1) Do not use acid glass glue when fixing, choose neutral glue, because acid glass glue usually reacts with the material on the back of the mirror, which is easy to cause spots on the mirror.
(2) Before coating glass glue, it is best to do a compatibility test to see whether the glass glue is compatible with the material, so as not to be unable to use and delay the construction period.
Install rearview mirror lights
Lighting is a very important decoration in the bathroom, so the mirror headlamp or the lamp on the side of the mirror is very important.
When installing rearview mirror headlights, it is recommended to install a lampshade or choose a lamp with a frosted glass surface to prevent glare.